Vulko-Wrap® Insulating Tape (Black Reinforced)
Reinforced Vulko-Wrap® has been embedded with a glass yarn fiber braid for added strength while maintaining the flexibility found in the traditional Vulko-Wrap product. Reinforced Vulko-Wrap has a temperature rating of from -60°F to +400°F and has a dielectric strength of 500 volts per mil. One roll has 36 feet of tape that is 1 inch wide. It is available in 40 mil thickness in the color black only.
- RoHS Compliant
- Operating Temperature Range -60°F to 400°F
- Temperature Rating -60°F to 400°F
- Self-Vulcanizing Wrap
- High Dielectric Strength
- Reinforced with Glass Yarn Fiber
REINFORCED WITH GLASS YARN BRAID — Reinforcing braid embedded in center of material provides enhanced mechanical strength while still allowing the product to cover irregular shapes.
HIGH DIELECTRIC STRENGTH — Can be used for all electrical connections.
VULCANIZES IMMEDIATELY — Requires no heat – becomes fully bonded in 24 hours at room temperature. Remains pliable over time.
NO ADHESIVES / ADHERES ONLY TO ITSELF — Easy to remove – leaves no residue. Covered fittings are immediately reusable.
AVAILABLE IN 40 MIL THICKNESS — Extra thick design allows wrapping over sharp and irregular surfaces without tearing or puncturing.
- Bus Bar Insulation
- Cable Insulation Splices
- Corrosive Areas
- Electroplating Danglers
- Food Related Equipment
- High Heat
- High Voltage
- HVAC Equipment
- Lift Truck Battery Cable Terminals
- Motor Leads
- Outdoor Terminations
- Temporary Repair of Low Pressure Air and Hydraulic Lines
- Terminal Splicing
- Transformer Tap Lead Insulation
- Washdown Areas
- Extreme Temperature
- Vulko-Wrap™ Instruction SheetDownload