I was told I could put whatever I wanted on the exterior of the cable shield – TPC gave me the idea to put our name and phone number on the cable jacket for future customers.
Steve Uhlir
Operations Manager, Classic Diagnostic Imaging – Macedonia, Ohio

HDLC Series Connectors

The most advanced line of connectors available according to MIL-C-5015 and VG95234. The HDLC connector series were developed specifically to meet the demands of industrial environments. The HDLC series shares the same shell dimensions, contact layouts, and electrical performance characteristics as the common MIL-C-5015 connectors with application engineered features such as three-quarter reverse bayonet coupling system, rubber covered coupling ring, black zinc shell plating and a superior sealing and strain relief system. Available in sizes from #18 to #1/0.

TPC HDLC Connector


Ratings/Characteristics

  • IP67 Rated
  • DIN 40 050 Rated
  • Mating Life: 2,000 Cycles Minimum (Commercial) 500 Cycles Minimum (to VG 95 234)
  • Vibration: 200 m/s2 at 10 to 2,000 Hz. To VG 95 234 Test 5.16
  • Shock: 50g 11ms, Three Major Axes. To VG 95 234 Test 5.17
  • Contact Type: Hard Silver Crimp
  • Number of Circuits: 1 to 65
  • VG 95 234 NATO Specification
  • Operating Temperature Range -55°C to 125°C


Features

  • THREE QUARTER TURN REVERSE BAYONET COUPLING SYSTEM — Easy to connect and disconnect, positive locking indent prevents accidental uncoupling.

  • RUBBER COVERED COUPLING RING — Protects the nut against damage from impact, provides a large non-slip gripping surface for easy mating.

  • ENVIRONMENTALLY SEALED — The inserts of the HDLC are environmentally sealed to protect the connection against oil, water and chemical contamination. The endbells are sealed with a tapered grommet sized to the specific cable providing a waterproof seal.

  • MESH STRAIN RELIEF — Each assembly end comes with a double weave strain relief for pull-out protection as well as flex relief for the cable.

  • FIRST MATE — LAST BREAK CONTACT — An extended ground pin insures first mate/last break contact for safety.

  • MACHINED CONTACTS — All contacts are machined, not stamped. This produces a heavier industrial contact that is less likely to crack or break during the crimp process.

  • SUPERIOR SHOCK AND VIBRATION RESISTANCE — Each connector contains a wave spring and wave spring washer designed to absorb shock and vibration in the coupler before it reaches the contacts. This helps to eliminate pin elongation and damage that may cause arcing and connector failure.

  • AVAILABLE IN AWG SIZES RANGING FROM #18 TO #1/0 — The HDLC connector accepts a wide range of Gauge sizes and configurations to meet your connector needs.



Environments

  • Abrasions
  • Chemicals
  • Flexing


Resources

Product Spec Sheet DOWNLOAD
Build Your Own Heavy-Duty Locking Connector Assemblies DOWNLOAD
I was told I could put whatever I wanted on the exterior of the cable shield – TPC gave me the idea to put our name and phone number on the cable jacket for future customers.
Steve Uhlir
Operations Manager, Classic Diagnostic Imaging – Macedonia, Ohio

Your Solution Starts Here

Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
Request A Quote