Search form

7 Pin Molded Valve Plugs

The 7-Pin Molded Valve Plug is available in a straight or 90° head with no assembly required. Each connector head is protected with an O-ring seal and coupling nut with machined hole for tie down. Used with Atos, Moog, Vickers and Rexroth servo or proportional valves.

Request a Quote

  • RoHS Compliant
  • Straight and 90° Configurations
  • TREX-ONICS® C-FLEX CABLE — Superior performance in continuous flex applications. TPC’s unique cable 18/6 shielded design has been tested to over 25 million cycles without electrical failure.
  • O-RING SEAL — Each connector head is protected with an o-ring seal. The o-ring compresses when tightened, sealing the connector end from contaminants.
  • 90° OR STRAIGHT CONSTRUCTION — Select the proper configuration for the application.
  • PUR MOLDED HEAD DESIGN — Rugged polyurethane head is molded to the Trex-Onics® cable to provide a sealed connection, eliminating the risk of failure due to contaminants.
  • COUPLING NUT WITH MACHINED HOLE — Hole can be used to tie down coupling ring and eliminate possible loosening caused by vibration and constant movement. Insures a secure connection in the toughest environments.
  • THREAD — 7/8"-20
  • Used with Atos
  • Moog
  • Vickers and Rexroth servo or proportional valves.
  • Abrasions
  • Chemicals
  • Flexing

Coming Soon

Coming Soon

77003, 77903, 77006, 77906, 77009, 77909, 77012, 77912, 77015, 77915, 77020, 77920, 77050, 77950, 77060, 77960