Call Us
800-211-4520
Get A Quote

    M23 Connector Assemblies

    We needed a better cable in critical areas of our control system so TPC showed us their Super-Trex® and Trex-Onics® products but TPC challenged us to try anything to cause a failure. We decided to try the most abusive thing we could think of — run the cable over with a 60,000 lb track rig. When the initial test didn’t cause a failure, we performed a 0 degree turn, pivoting directly on the cable. The only damage to the cable was the abraded outer casing. Since this experiment 3 years ago, we have been using Super-Trex® and Trex-Onics® for our mission-critical cable assemblies, without a failure.
    Al Creely
    Senior Control Engineer Schramm, Inc.

    Molded & Mechanical M23 Connector Assemblies

    Ratings | Features | Applications | Environments | Resources

    TPC’s Molded M23 Connector Assemblies are a superior choice for your servo motor cables used in Rockwell, Allen Bradley and Siemens applications. Designed with a fully molded backend (mechanical options also available), our M23 connector assemblies withstand the abuse caused by continuous flexing and pulling, making it the ideal solution for keeping your applications running smoothly.

    molded mechanical m23 connector assemblies

    Ratings/Characteristics

    • IP67/IP69K per EN 60 629 (connected)
    • Operating Temperature Range -40º to 125ºC
    • Mating Cycles > 1000
    • Nickel Plated Housing Surface

    Features

    • Fully Molded Backend – Prevents the ingress of dirt and moisture, allows for flexing without cable pulling out of the connector.

    • Numerous Insert Variations – The M23 insert offering is versatile in design accommodating both signal and power applications ranging from 28-14 AWG.

    • Slim/Low Profile Molded Design – Small molded backend for easy installation and routing.

    • M23 Interface – Used as the preferred connection in many motor and drive applications and offers both the threaded and quick bayonet locking systems.

    • Superior Cables – TPC offers a wide array of cable products to fit the M23 Product line.

    • Customizable – TPC’s engineering group offers custom pinouts and wiring capabilities with numerous cable products at any length you require. You can get the cable assembly you need designed specifically to your application.

    • Fully Assembled – Don’t hassle with the assembly of these connectors in the field. TPC can build all of your molded and mechanical assemblies.


    Applications

    • Servo Motors
    • VFP Applications
    • Encoders (EnDat)
    • Resolvers
    • Shielded Power Cables
    • Data & Single Cables
    • Robotic Movement and Automation
    • Conveyors

    Environments

    • Abrasions 
    • Flexing

    Resources

    Product Spec Sheet DOWNLOAD
    Build Your Own M23 Connector Assembly DOWNLOAD
    We needed a better cable in critical areas of our control system so TPC showed us their Super-Trex® and Trex-Onics® products but TPC challenged us to try anything to cause a failure. We decided to try the most abusive thing we could think of — run the cable over with a 60,000 lb track rig. When the initial test didn’t cause a failure, we performed a 0 degree turn, pivoting directly on the cable. The only damage to the cable was the abraded outer casing. Since this experiment 3 years ago, we have been using Super-Trex® and Trex-Onics® for our mission-critical cable assemblies, without a failure.
    Al Creely
    Senior Control Engineer Schramm, Inc.

    YOUR SOLUTION STARTS HERE

    Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
    Request A Quote