Call Us
800-211-4520
Request A Quote

    Cord Sets & Wire Quick Connectors

    Norfolk Naval Shipyard brought to the rep’s attention a few ideas to improve our welding cables and lines. TPC picked up the ball and designed products that we now use at the Navy Yard every day.
    Douglas E. Kubizna
    Supervisor, Norfolk Naval Shipyard

    7 Pin Molded Valve Plugs

    Ratings | Features | Applications | Environments | Resources | Part Numbers

    TPC Wire & Cable Corp.’s 7 Pin Molded Valve Plugs are available in straight and 90° with no assembly required. All products are RoHS Compliant and can be used with Atos, Moog, Vickers and Rexroth servo or proportional valves. They also come with Trex-Onics® C-Flex Cable giving you superior performance and TPC’s unique cable 18/6 shielded design that has been tested through more than 25 million cycles without electrical failure.

    Each connector is protected with an o-ring seal that compresses when it is tightened, sealing the connector from contaminants. A PUR molded head design provides an extra sealed protection against contaminants as well. For added sealed protection, the coupling nut with machine hole can be used to tie down the coupling to eliminate any possibility of loosening.

    Request a Quote

    Product Spec Sheet
    7 Pin Molded Valve Plugs

    Ratings/Characteristics

    • RoHS Compliant
    • Straight and 90° Configurations

    Features

    • TREX-ONICS® C-FLEX CABLE — Superior performance in continuous flex applications. TPC’s unique cable 18/6 shielded design has been tested to over 25 million cycles without electrical failure.
    • O-RING SEAL — Each connector head is protected with an o-ring seal. The o-ring compresses when tightened, sealing the connector end from contaminants.
    • 90° OR STRAIGHT CONSTRUCTION — Select the proper configuration for the application.
    • PUR MOLDED HEAD DESIGN — Rugged polyurethane head is molded to the Trex-Onics® cable to provide a sealed connection, eliminating the risk of failure due to contaminants.
    • COUPLING NUT WITH MACHINED HOLE — Hole can be used to tie down coupling ring and eliminate possible loosening caused by vibration and constant movement. Ensures a secure connection in the toughest environments.
    • THREAD — 7/8"-20

    Applications

    • Used with Atos
    • Moog
    • Vickers and Rexroth servo or proportional valves.

    Environments

    • Abrasions
    • Chemicals
    • Flexing

    Resources

    Product Spec Sheet  DOWNLOAD

    Part Numbers

    • 77003
    • 77903
    • 77006
    • 77906
    • 77009
    • 77909
    • 77012
    • 77912
    • 77015
    • 77915
    • 77020
    • 77920
    • 77050
    • 77950
    • 77060
    • 77960
    Norfolk Naval Shipyard brought to the rep’s attention a few ideas to improve our welding cables and lines. TPC picked up the ball and designed products that we now use at the Navy Yard every day.
    Douglas E. Kubizna
    Supervisor, Norfolk Naval Shipyard

    YOUR SOLUTION STARTS HERE

    Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
    Request A Quote
    TPC_logo-1
    Get In Touch
    TPC Wire & Cable Corp.
    9600 Valley View Rd
    Macedonia, OH 44056
    (800) 211-4520
    ©2021 TPC Wire & Cable Corp. All Rights Reserved. | Privacy Policy | Subscribe to Our Mailing List | Terms of Use | Credit Application