Call Us
800-211-4520
Get A Quote

    Mini Quick-Connect™ Assemblies & Accessories

    Quick-Connect™ Quick-Lock for Class I, Division 2 Hazardous Locations

    The Quick-Connect™ Quick-Lock is a locking safety device for use on size “A” Mini Quick-Connects™ 3 through 6 pole. It can be used with a separate lock for additional security (lock not included) and in non-hazardous locations as a safety lock-out device. Because it makes disconnection impossible, the Quick-Lock serves as a safety device, warning the operator to disconnect the power before removing. Requires a tool for removal or a key when used in conjunction with the Quick-Lock lock. When building cord sets with Quick-Lock for use in hazardous locations, follow the Smart Part No. instructions from the spec sheet below.

    TPC Quick-Lock For Hazardous Locations


    Ratings/Characteristics

    • UL / cUL Listed
    • For Use In UL Hazardous Locations Class 1, Division 2


    Features

    • Provides protection against unintentional separation of cable connection and power source.
    • Quick-Lock requires a tool for removal and is captive to the cable assembly by a tether strap.
    • An installation drawing is included and referenced on the Quick-Lock locking mechanism.
    • Master Lock part no. 84126 to be used with the Quick-Connect™ Quick-Lock for safety lock-out.
    • 1 3/16" (30mm) wide black, vinyl covered body for scratch resistance, made of corrosion resistant materials.
    • 3/16" diameter shackle is 5/8" long and made of hardened steel shackle for extra resistance to cutting and sawing.
    • 4-pin cylinder prevents picking, dual locking levers provide resistance against prying and hammering.
    • Matching colored key head for added convenience, comes with two keys (every lock is keyed differently).


    Applications

    • Anywhere an interruption of power will cause a safety issue.


    Resources

    Product Spec Sheet DOWNLOAD
    Build Your Own Cord Sets with Quick-Lock Assembly for Hazardous Locations DOWNLOAD
    Wiring Solutions for Hazardous Areas DOWNLOAD

     

    We experienced some failures with some of our armored cable runs and decided to give TPC’s 6/4 Super-Trex® a trial run and now we have installed close to 4,000 feet of this cable while experiencing zero failures.
    Al Plybon
    Electrical & Instrumentation Planner, Simpson Tacoma Kraft

    YOUR SOLUTION STARTS HERE

    Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
    Request A Quote