Call Us
800-211-4520
Get A Quote

    Custom Connector Assemblies

    We needed a better cable in critical areas of our control system so TPC showed us their Super-Trex® and Trex-Onics® products but TPC challenged us to try anything to cause a failure. We decided to try the most abusive thing we could think of — run the cable over with a 60,000 lb track rig. When the initial test didn’t cause a failure, we performed a 0 degree turn, pivoting directly on the cable. The only damage to the cable was the abraded outer casing. Since this experiment 3 years ago, we have been using Super-Trex® and Trex-Onics® for our mission-critical cable assemblies, without a failure.
    Al Creely
    Senior Control Engineer Schramm, Inc.

    Polycarbonate Pendant Box Assembly

    Ratings | Features | Resources

    TPC's Polycarbonate Pendant Box Assemblies come pre-wired, ready for immediate installation. Due to the customization needed for each customer, each pendant is quoted separately to ensure we provide an out of the box solution for the application. Engineering will provide a custom print at time of purchase to ensure all wiring and label callouts are correct. Download the product spec sheet to show the possible pendant system options TPC can accommodate.

    TPC Polycarbonate Pendant Box Assembly

    Ratings/Characteristics

    • UL Listed
    • cUL
    • CSA
    • NEMA 4X Enclosure
    • Operating Temperature Range -10°F to 150°F (-23°C to 65°C)

    Features

    • Each pendant assembly comes pre-wired, ready for immediate installation. Simplify your installation, save time and reduce your costs.
    • Each pendant assembly is fabricated with TPC’s proprietary high performance cable which is specifically designed to handle the most severe applications and provide longer cable life.
    • Push-buttons are rated for 300,000 cycles and are protected from internal and external contaminants.
    • Impact resistant and watertight NEMA 4X enclosure is suitable for industrial applications. A stainless steel mesh strain relief reduces wear and extends the usefulness of the pendant in the most demanding environments.
    • Weighs less than 2 pounds, is easy to work with and reduces stress on the cable and connections. This helps to extend the life of the pendant/cable assembly.
    • Two, four, six and eight push button available with 1 and 2 speed operation.

    Resources

    Build Your Own Pendant Box Assembly  DOWNLOAD
    Product Spec Sheet  DOWNLOAD

     

    We needed a better cable in critical areas of our control system so TPC showed us their Super-Trex® and Trex-Onics® products but TPC challenged us to try anything to cause a failure. We decided to try the most abusive thing we could think of — run the cable over with a 60,000 lb track rig. When the initial test didn’t cause a failure, we performed a 0 degree turn, pivoting directly on the cable. The only damage to the cable was the abraded outer casing. Since this experiment 3 years ago, we have been using Super-Trex® and Trex-Onics® for our mission-critical cable assemblies, without a failure.
    Al Creely
    Senior Control Engineer Schramm, Inc.

    YOUR SOLUTION STARTS HERE

    Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
    Request A Quote