Tape

Our weld lead and power lead cables are subject to extreme conditions. They lie in oils, solvents, soaps, and are subject to being run over by forklifts and other machinery. Previous to TPC, we changed out cable two to three times per year on each of our eight welding machines. Some of our machines have been equipped with TPC cable for three full years!
Dennis D. Bullock
Boilermaker Leadman, Northtown Diesel Shop, Burlington Northern Railroad

Vulko-Wrap® Insulating Tape (Yellow and Black)

Vulko-Wrap® is TPC’s popular self-vulcanizing insulated wrap. Made of a specially compounded, synthetic silicone elastomer, this tape is resistant to oil, water, ozone and many chemicals. It has a high dielectric strength and can be used on all electrical connections. It sticks to itself without sticky residue and fully bonds in 24 hours yet remains pliable in the application. It remains effective in temperatures ranging from -60°F to +400°F. Vulko-Wrap is available in 40 or 50 mil thickness as well as a reinforced option. It comes in yellow and black.

Vulko Wrap Yellow Black


Ratings / Characteristics

  • CID A-A-59163A, Type II
  • RoHS Compliant
  • Temperature Rating -60°F to 400°F
  • Self-Vulcanizing Wrap
  • High Dielectric Strength


Features

  • REINFORCED WITH GLASS YARN BRAID — Reinforcing braid embedded in the center of material provides enhanced mechanical strength while still allowing the product to cover irregular shapes.
  • HIGH DIELECTRIC STRENGTH — Can be used for all electrical connections.
  • VULCANIZES IMMEDIATELY — Requires no heat – becomes fully bonded in 24 hours at room temperature. Remains pliable over time.
  • NO ADHESIVES / ADHERES ONLY TO ITSELF — Easy to remove – leaves no residue. Covered fittings are immediately reusable.
  • AVAILABLE IN 40 MIL THICKNESS — Extra thick design allows wrapping over sharp and irregular surfaces without tearing or puncturing.


Applications

  • Bus Bar Insulation
  • Cable Insulation Splices
  • Corrosive Areas
  • Electroplating Danglers
  • Food Related Equipment
  • High Heat
  • High Voltage
  • HVAC Equipment
  • Lift Truck Battery Cable Terminals
  • Motor Leads
  • Outdoor Terminations
  • Temporary Repair of Low Pressure Air and Hydraulic Lines
  • Terminal Splicing
  • Transformer Tap Lead Insulation
  • Washdown Areas


Environments

  • Chemicals
  • Extreme Temperature
  • Flexing


Videos



Resources

Vulko-Wrap™ Instruction Sheet  DOWNLOAD
Product Spec Sheet  DOWNLOAD


Part Numbers 

  • 98412
  • 98512
  • 98412BK
  • 98512BK
  • 98412D
  • 98512D
  • 98412BKD
  • 98512BKD

14 questions you should be asking your industrial supplier

Our weld lead and power lead cables are subject to extreme conditions. They lie in oils, solvents, soaps, and are subject to being run over by forklifts and other machinery. Previous to TPC, we changed out cable two to three times per year on each of our eight welding machines. Some of our machines have been equipped with TPC cable for three full years!
Dennis D. Bullock
Boilermaker Leadman, Northtown Diesel Shop, Burlington Northern Railroad

YOUR SOLUTION STARTS HERE

Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
Request A Quote