Ethernet Cable Products

We needed a better cable in critical areas of our control system so TPC showed us their Super-Trex® and Trex-Onics® products but TPC challenged us to try anything to cause a failure. We decided to try the most abusive thing we could think of — run the cable over with a 60,000 lb track rig. When the initial test didn’t cause a failure, we performed a 0 degree turn, pivoting directly on the cable. The only damage to the cable was the abraded outer casing. Since this experiment 3 years ago, we have been using Super-Trex® and Trex-Onics® for our mission-critical cable assemblies, without a failure.
Al Creely
Senior Control Engineer Schramm, Inc.

Chem-Gard® 200°C CAT6 INDUSTRIAL Ethernet Cable 

This rugged Industrial Ethernet CAT6 cable is built for performance in the harshest of environments. Chem-Gard’s unique physical properties offer resistance to UV light, cutting, abrasion, oil & chemicals and extreme temperatures. TPC Wire & Cable’s Chem-Gard® CAT6 cable provides superior performance to meet or exceed CAT6 and Ethernet/IP requirements.

New Chem-Gar 200 Cat6 Industrial Ethernet Cable


Ratings / Characteristics

  • TIA/EIA 568-B-2 CAT 6
  • 300 V
  • Max Conductor Temperature 200°C
  • Cold Temperature Rating -60ºC
  • Finely Stranded Silver-Plated Copper


Features

  • FINELY STRANDED SILVER ALLOY CONDUCTORS — Improved high-temperature flexibility and offers longer flex life and unique conductor lay length.

  • CENTER SPLINE — Keeps conductors separated and in their proper lay.

  • UNIQUE JACKET DESIGN — Provides a Chem-Gard® jacket to protect conductors from impact, and keep the lay lengths intact to provide protection from environmental abuse and defense against cutting, abrasion, extreme temperatures, oil and chemicals. Contains an aramid rip cord for ease of stripping.

  • CHEMICAL RESISTANCE — Eliminates the need for compounds or lubricants when pulling through conduit and the tough jacket will also withstand abrasion and cutting.

  • PART NO. 60063 SHIELDED CAT6 INDUSTRIAL ETHERNET CABLE — Silver-plated copper braid shield with 95% coverage that reduces radiated and conducted electrical noise and interference.


Applications

  • Data Processing & Information Systems
  • High Bandwidth Digital Applications
  • High Data Rate Applications


Environments

  • Abrasions
  • Chemicals
  • Extreme Temperature
  • Flexing
  • Impact
  • Tension


Resources

Build Your Own Ethernet Cable Assemblies  DOWNLOAD
Product Spec Sheet  DOWNLOAD


Part Numbers

  • 60063
  • 60064

New Call-to-action

We needed a better cable in critical areas of our control system so TPC showed us their Super-Trex® and Trex-Onics® products but TPC challenged us to try anything to cause a failure. We decided to try the most abusive thing we could think of — run the cable over with a 60,000 lb track rig. When the initial test didn’t cause a failure, we performed a 0 degree turn, pivoting directly on the cable. The only damage to the cable was the abraded outer casing. Since this experiment 3 years ago, we have been using Super-Trex® and Trex-Onics® for our mission-critical cable assemblies, without a failure.
Al Creely
Senior Control Engineer Schramm, Inc.

YOUR SOLUTION STARTS HERE

Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
Request A Quote