Call Us
800-211-4520
Get A Quote

    Network Cable Products

    DeviceNet™ Flex-Net Thick Cable

    Trex-Onics® Flex-Net Cable is designed to meet the electrical requirements identified by the Open DeviceNet Association (ODVA). The heavy-duty Ultra-Shield construction is a combination of two shielding technologies that provides both mechanical strength and 100% shielding protection from EMI and RF interference. The heavy-duty jacket provides excellent defense against cutting, abrasion, oil and chemicals, and is also flame and heat resistance. Flex-Net Cable meets the performance requirements as specified by ODVA with a capacitance between conductors – 12 pF/foot at 1 MHz (nominal), capacitance between one conductor and other conductor connected to shield is 24 pF/foot (nominal), impedance of 120 Ohms +/- 10% at 1 MHz, and propagation delay of 1.36 nSec/foot (maximum). Flex-Net Cable is available as a “Thick or Trunk Cable” high-performance design.

    Product Spec Sheet
    Flex-Net Thick Cable


    Ratings / Characteristics

    • UL Recognized in the U.S. and Canada
    • Type PLTC
    • FT-4 Flame Rating
    • ODVA Conformity
    • RoHS Compliant
    • 300 V
    • Max Conductor Temperature 80°C


    Features

    • ULTRA-SHIELD CONSTRUCTION, A HEAVY-DUTY COMBINATION OF TINNED COPPER SHIELD AND AN ALUMINUM/POLYESTER FOIL SHIELD — 100% shielding provides protection from EM and RF interference. Finely stranded spiral braid provides superior mechanical strength.

    • HEAVY-DUTY GRAY TREX-ONICS® TPE JACKET — Excellent defense against cutting, abrasion, oil and chemicals.

    • ELECTRONICALLY TESTED — Meets the performance requirements as specified by ODVA™.

    • 18 AWG DRAIN WIRE

    • TINNED COPPER CONDUCTORS — Resists corrosion. Easier to solder.

    • FINE STRANDED COPPER CONDUCTORS — Improves flex life in abusive applications.

    • COMMON AXIS DESIGN — Equal stresses are placed on all conductors. Provides superior performance in Torsional and Bending applications.



    Environments

    • Abrasions
    • Chemicals


    Resources

    Product Spec Sheet  DOWNLOAD


    Part Numbers

    • 60001
    I was informed that because my project was custom I could orient each wire in the cable to sit next to the one I wanted it to, taking up less room in the junction box.
    Steve Uhlir
    Operations Manager, Classic Diagnostic Imaging – Macedonia, Ohio

    YOUR SOLUTION STARTS HERE

    Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
    Request A Quote