Network Cable Products

Trex-Onics® DeviceNet™ Flex-Net "Thick" Cable

Flex-Net Cable is designed to meet the electrical requirements identified by the Open DeviceNet Association (ODVA). The heavy-duty Ultra-Shield construction is a combination of two shielding technologies that provides both mechanical strength and 100% shielding protection from EMI and RF interference. The heavy-duty jacket provides excellent defense against cutting, abrasion, oil and chemicals, and is also flame and heat resistance. Flex-Net Cable meets the performance requirements as specified by ODVA with a capacitance between conductors – 12 pF/foot at 1 MHz (nominal), capacitance between one conductor and other conductor connected to shield is 24 pF/foot (nominal), impedance of 120 Ohms +/- 10% at 1 MHz, and propagation delay of 1.36 nSec/foot (maximum). Flex-Net Cable is available as a “Thick or Trunk Cable” high-performance design.

Flex-Net Thick Cable


Ratings / Characteristics

  • UL Recognized in the U.S. and Canada
  • Type PLTC
  • FT-4 Flame Rating
  • ODVA Conformity
  • RoHS Compliant
  • 300 V
  • Max Conductor Temperature 80°C


Features

  • ULTRA-SHIELD CONSTRUCTION, A HEAVY-DUTY COMBINATION OF TINNED COPPER SHIELD AND AN ALUMINUM/POLYESTER FOIL SHIELD — 100% shielding provides protection from EM and RF interference. Finely stranded spiral braid provides superior mechanical strength.

  • HEAVY-DUTY GRAY TREX-ONICS® TPE JACKET — Excellent defense against cutting, abrasion, oil and chemicals.

  • ELECTRONICALLY TESTED — Meets the performance requirements as specified by ODVA™.

  • 18 AWG DRAIN WIRE

  • TINNED COPPER CONDUCTORS — Resists corrosion. Easier to solder.

  • FINE STRANDED COPPER CONDUCTORS — Improves flex life in abusive applications.

  • COMMON AXIS DESIGN — Equal stresses are placed on all conductors. Provides superior performance in Torsional and Bending applications.



Environments

  • Abrasions
  • Chemicals


Resources

Product Spec Sheet  DOWNLOAD


Part Numbers

  • 60001
As a Supervisor of Norfolk Naval Shipyards Equipment Section servicing over 400 welders, I have one less area of concern when issuing TPC products to my welders.”
Douglas E. Kubizna
Supervisor, Norfolk Naval Shipyard

YOUR SOLUTION STARTS HERE

Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
Request A Quote