Plug & Play Cabling System Products

I was informed that because my project was custom I could orient each wire in the cable to sit next to the one I wanted it to, taking up less room in the junction box.
Steve Uhlir
Operations Manager, Classic Diagnostic Imaging – Macedonia, Ohio

Medium Voltage Single Conductor Power Cable & Assemblies

TPC’s Medium Voltage Single Conductor Power cable is a highly flexible single conductor shielded medium voltage cable designed to ICEA standards. An extra heavy-duty TSE jacket provides excellent protection against tearing, abrasion, oil, impact and most industrial chemicals. Available in voltages from 5kV to 35kV. Ideal for applications where flexibility and ease of use is required. TPC can also add a connector to this cable and deliver a complete assembly — ready to install. A full testing report is provided below to certify the testing and ensure the highest quality workmanship and traceability of the “ready to install” assembly.

Medium Voltage Single Conductor Power Cable

Ratings / Characteristics

  • FT-4 Flame Rating
  • IEEE - 383 Flame Rating
  • RoHS Compliant
  • 600 V

Features

  • CONDUCTOR — High flex tin coated bunch stranded copper conductors, for long life in harsh environments.
  • CONDUCTOR SHIELD — Combination of semi-conducting tape and extruded semi-conductive TSE.
  • INSULATION SHIELD — Tin coated braid shield placed over semi-conductive tape.
  • REINFORCEMENT † — Rayon tire cord reinforcing, improves cable resistance to pulling and twisting.
  • INSULATION — EPR insulation provides protection from moisture, heat and ozone.
  • INNER JACKET — Heavy-duty TSE provides added strength.
  • OUTER JACKET — Extra heavy-duty TSE jacket provides excellent protection against industrial and environmental abuse. Resists tearing, abrasion, oil, impact, ozone and most chemicals.
  • Please contact a TPC Power-Trex® Representative or 1-888-551-6991 for additional information.

Resources

Medium Voltage Cable Assembly Testing Report  DOWNLOAD
Product Spec Sheet  DOWNLOAD

Part Numbers

  • 70502
  • 70540
  • 70525
  • 70535
  • 70550
  • 70102
  • 70110
  • 70140
  • 70125
  • 70135
  • 70150
  • 70201
  • 70210
  • 70240
  • 70225
  • 70235
  • 70250
  • 70275
  • 70310
  • 70316
  • 70340
  • 70325
  • 70335
  • 70350
I was informed that because my project was custom I could orient each wire in the cable to sit next to the one I wanted it to, taking up less room in the junction box.
Steve Uhlir
Operations Manager, Classic Diagnostic Imaging – Macedonia, Ohio

YOUR SOLUTION STARTS HERE

Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
Request A Quote