Cord Sets & Wire Quick Connectors

I love the orientation of the individual wires within the cable shield. It makes it so much easier, not to mention neater, to assign the wires to their designated places.
Steve Uhlir
Operations Manager, Classic Diagnostic Imaging – Macedonia, Ohio

7 Pin Molded Valve Plugs

TPC Wire & Cable Corp.’s 7 Pin Molded Valve Plugs are available in straight and 90° with no assembly required. All products are RoHS Compliant and can be used with Atos, Moog, Vickers and Rexroth servo or proportional valves. They also come with Trex-Onics® C-Flex Cable giving you superior performance and TPC’s unique cable 18/6 shielded design that has been tested through more than 25 million cycles without electrical failure.

Each connector is protected with an o-ring seal that compresses when it is tightened, sealing the connector from contaminants. A PUR molded head design provides an extra sealed protection against contaminants as well. For added sealed protection, the coupling nut with machine hole can be used to tie down the coupling to eliminate any possibility of loosening.

7 Pin Molded Valve Plugs


Ratings/Characteristics

  • RoHS Compliant
  • Straight and 90° Configurations


Features

  • TREX-ONICS® C-FLEX CABLE — Superior performance in continuous flex applications. TPC’s unique cable 18/6 shielded design has been tested to over 25 million cycles without electrical failure.
  • O-RING SEAL — Each connector head is protected with an o-ring seal. The o-ring compresses when tightened, sealing the connector end from contaminants.
  • 90° OR STRAIGHT CONSTRUCTION — Select the proper configuration for the application.
  • PUR MOLDED HEAD DESIGN — Rugged polyurethane head is molded to the Trex-Onics® cable to provide a sealed connection, eliminating the risk of failure due to contaminants.
  • COUPLING NUT WITH MACHINED HOLE — Hole can be used to tie down coupling ring and eliminate possible loosening caused by vibration and constant movement. Ensures a secure connection in the toughest environments.
  • THREAD — 7/8"-20


Applications

  • Used with Atos
  • Moog
  • Vickers and Rexroth servo or proportional valves.


Environments

  • Abrasions
  • Chemicals
  • Flexing


Resources

Product Spec Sheet  DOWNLOAD


Part Numbers

  • 77003
  • 77903
  • 77006
  • 77906
  • 77009
  • 77909
  • 77012
  • 77912
  • 77015
  • 77915
  • 77020
  • 77920
  • 77050
  • 77950
  • 77060
  • 77960
I love the orientation of the individual wires within the cable shield. It makes it so much easier, not to mention neater, to assign the wires to their designated places.
Steve Uhlir
Operations Manager, Classic Diagnostic Imaging – Macedonia, Ohio

YOUR SOLUTION STARTS HERE

Reach out today, and an experienced technical expert will contact you to assess your needs and provide an initial quote.
Request A Quote